E-Box, Wire Junction, Fuse Holder and Battery Overview
E-Box, Wire Junction, Fuse Holder and Battery Overview
1 Terminal 30 Wire Junction 2 (TV22)
• Removing and installing, refer to => [ Terminal 30 Wire Junction 2 ] Terminal 30 Wire Junction 2.
2 Right Door Cut Off Connector
• Disconnecting, refer to => [ Door Cut Off Connector, Disconnecting ] Door Cut Off Connector, Disconnecting.
3 Fuse Panel A (SA)
• In the luggage compartment on the battery.
• Removing and installing, refer to => [ Fuse Panel A in Luggage Compartment ] Fuse Panel A In Luggage Compartment.
4 Left Door Cut Off Connector
• Disconnecting, refer to => [ Door Cut Off Connector, Disconnecting ] Door Cut Off Connector, Disconnecting.
5 Fuse Panel B (SB)
• Relay/fuse panel in engine compartment E-box.
• Removing and installing, refer to => [ Fuse Panel B in Engine Compartment E-Box ] Fuse Panel B In Engine Compartment E-Box.
• With suppressor (C24) , removing and installing. Refer to => [ Suppressor ] Suppressor.
6 Cover
• For the engine compartment E-box.
7 Engine Control Module (ECM)
8 Engine Compartment E-Box
• Removing and installing, refer to => [ Engine Compartment E-Box ] Engine Compartment E-Box.
• Tightening specifications, refer to => [ Engine Compartment E-Box, Tightening Specifications ].
Engine Compartment E-Box, Tightening Specifications
1. Bolt - 3.5 Nm
2. Engine compartment E-box cover
3. Bolt - 4.5 Nm
4. Engine compartment E-box
Fuse Panel B in Engine Compartment E-Box, Tightening Specifications
1. Positive wire - 9 Nm
2. Fuse panel B
3. Electrical wire on the back - 9 Nm
Terminal 30 Wire Junction 2, Tightening Specifications
1. Fan wire - 7.5 Nm
2. Fan wire - 7.5 Nm
3. PTC line - 18 Nm
4. Nut - 7.5 Nm
5. E-box positive wire - 7.5 Nm
6. Battery wire - 18 Nm
7. Battery jump start terminal - 20 Nm
8. Bolt - 7.5 Nm
9. Starter positive cable - 18 Nm
10. Nut - 7.5 Nm
Fuse Panel A, Tightening Specifications
1. Electrical wire - 7.5 Nm
2. Nut - 9 Nm
3. Nut - 9 Nm
4. Fuse panel A inside the luggage compartment
5. Positive wire to the engine - 7.5 Nm
6. Bolt - 3.5 Nm
8. Electrical wire - 18 Nm