Fuse Panel A In Luggage Compartment

Fuse Panel A in Luggage Compartment

Removing






- With the ignition switched off, disconnect the negative battery cable. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the tool kit mount - 1 -.

• If it is not possible to remove fuse panel A from the battery terminal, then remove the bolt - 4 - on the battery bracket - 3 - and pull the battery - 2 - just a little to the left - arrow -.

- Loosen the nut - 1 - several turns and remove the battery positive wire terminal clamp with the fuse panel A from the battery terminal.






- Release the spring - 3 - and open the cover - 2 - over fuse panel A - arrow -.

- Disconnect electrical wires - 1, 5, 6 and 8 -.






• Ignore items - 2 , 3 -.

- Remove the positive terminal clamp - 4 - and fuse panel A from the battery terminal.

- Remove the battery interrupt igniter (N253) - item 7 -.

- Remove the fuse panel A.

• Check the exact assignment for fuse panel A in the current wiring diagram.

Installing

• Tightening specifications, refer to => [ Fuse Panel A, Tightening Specifications ] E-Box, Wire Junction, Fuse Holder and Battery Overview.

Install in reverse order of removal, observing the following:

- Install the battery interrupt igniter.