Front Three-Point Seat Belt Assembly Overview

Front Three-point Seat Belt Assembly Overview

Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and General Information ] Restraint System Components, Safety Precautions and General Information.






1 Belt roller/belt tensioner

• Removing and Installing, refer to => [ Front Three-Point Seat Belt ] Front Three-Point Seat Belt

2 Bolt

• 55 Nm

• If three-point seat belt is being removed for accident repairs, replace screw

3 Belt tensioner connector

• Removing and installing => [ Front Three-Point Seat Belt ] Front Three-Point Seat Belt

4 Nut

• 5 Nm

5 Front belt guide

• Removing and Installing, refer to => [ Front Belt Guide ] Front Belt Guide

6 Belt height adjustment

• Removing and Installing, refer to => [ Front Seat Belt Height Adjuster Assembly Overview ] Front Seat Belt Height Adjuster Assembly Overview

• Function test => [ When checking function, following conditions must be fulfilled: ] Front Seat Belt Height Adjuster

7 Bolt

• 21 Nm

• If the seat belt height adjuster is being removed for accident repairs, replace the screw

8 Belt relay

• Belt relay must swing by itself in carrier direction after tightening screw.

9 Bolt

• 55 Nm

• If belt relay is being removed for accident repairs, replace screw

• Belt relay must swing by itself in carrier direction after tightening screw.

10 B-pillar trim

11 Belt height adjustment slide

12 Belt webbing

13 Belt anchor

• Removing and Installing, refer to => [ Belt Anchor ] Belt Anchor

14 Expanding rivet

• Quantity: 3

15 Air duct

• For the correct allocation, refer to parts catalog