Headlamp Washer Spray Nozzle: Service and Repair

Headlight washers

Operation number: 36323-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Hint: For replacing washer motor and level sensor, see: Washer fluid reservoir. Service and Repair


Preparatory work

Removing the headlamp and bumper cover

Remove:
- the headlamp. Headlamp Bulb
- the bumper cover. Service and Repair


Removal

Removing high-pressure washer headlamp





Remove:
- the 2 screws
- the high-pressure washer
- the clips on the hose connector
- the hose.

Installation

Installing the high-pressure washer headlamp

Install:
- the clips on the hose connector
- the hose
- the high-pressure washer
- the 2 screws.

Finishing

Installing headlamp and bumper cover

Install:
- the bumper cover. Service and Repair
- the headlamp. Headlamp Bulb

Adjusting nozzle




Test the function.
Adjust the alignment of the nozzle as necessary as illustrated. The cover must be against the bumper cover without any play.