Wheel Housing Trim

Wheel Housing Trim

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Remove the bench seats. Refer to => [ Bench Seats ] Bench Seats.

- Remove the rear seats. Refer to => [ Rear Seats ] Rear Seats.

- Remove the belt anchor of the outer rear seat. Refer to => [ Outer Rear Seat Belt Anchors ] Outer Rear Seat Belt Anchors.

- Remove the C-pillar trim. Refer to => [ C-Pillar Trim ] C-Pillar Trim.

- Unclip the wheel housing trim - 1 -.






Installation

- Installation is performed in the reverse order of removal.

• During and after assembly, the wheel housing trim - 1 - must be pressed in the bottom area to the floor covering - arrow -.