C-Pillar Trim

C-Pillar Trim

• Removal and installation are described for the left side of the vehicle. Removal and installation for the right side are performed in the same manner.

Removal

- Remove the bench seats. Refer to => [ Bench Seats ] Bench Seats.

- Remove the rear seats. Refer to => [ Rear Seats ] Rear Seats.

- Remove the belt anchor of the outer rear seat. Refer to => [ Outer Rear Seat Belt Anchors ] Outer Rear Seat Belt Anchors.

- Unclip the C-pillar trim - 2 - from the wheel housing trim - 1 -.






- Press the C-pillar trim outward in the transition area to the headliner and then pull it forward from under the headliner.

- Thread the seat belt through the belt height adjuster.

Installation

- Installation is performed in the reverse order of removal.

• Check whether the trim is in the door seal piping after installation.