Ribbed Belt and Tensioner Overview

Ribbed Belt and Tensioner Overview






1 Vibration Damper

• Installation is only possible in one position because of the offset holes.

2 Bolt

• 25 Nm

3 Generator

4 Accessory Bracket

• For the Air Conditioning (A/C) compressor, generator, belt tensioner and idler pulley.

• Removing and installing, refer to => [ Accessory Bracket ] Service and Repair.

5 Bolt

• 35 Nm

• Always replace.

6 Ribbed Belt Tensioner

• Removing and installing, refer to => [ Ribbed Belt Tensioner ] Service and Repair.

7 A/C Compressor

8 Bolt

• Tightening specification.

9 Alignment Sleeves

10 Ribbed Belt

• Mark the direction of rotation before removing.

• Check for wear.

• Do not kink.

• Removing and installing, refer to => [ Ribbed Belt ] Ribbed Belt.