Sill Panel Trim

Sill Panel Trim

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Remove the side cushion:

• with rear side airbags => [ Side Upholstery with Side Airbag ] Side Upholstery with Side Airbag.

• without rear side airbags => [ Side Upholstery without Side Airbag ] Side Upholstery without Side Airbag.

Sedan

- Remove wheel housing trim.

Wagon

- Remove wheel housing trim. Refer to => [ Wheel Housing Trim, Wagon ] Wheel Housing Trim, Wagon.

All vehicles

- Pull sill panel trim out of front sill panel and door seal piping.

- Remove guide - 1 - from lower B-pillar trim.

- Pull sill panel trim out of rear sill panel and door seal piping.

- Remove guide - 2 - from lower B-pillar trim.

- Open strap - 3 - and feed seat belt through it.

• Before installing, check securing clips for damage and replace if necessary.






Installing

Install in reverse order of removal.