Wheel Housing Trim, Wagon

Wheel Housing Trim, Wagon

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Fold the bench seat forward.

- Remove the side cushion:

• with rear side airbags => [ Side Upholstery with Side Airbag ] Side Upholstery with Side Airbag.

• without rear side airbags => [ Side Upholstery without Side Airbag ] Side Upholstery without Side Airbag.

- Remove the bolt - 1 - (1.5 Nm).

- Remove clip - 2 - from body flange.

- Pull trim - 3 - from door seal piping - 4 -.

- Pull trim out of mounts in sill panel trim - 5 -.

- Pull out trim in direction of travel under the C-pillar trim panel - 6 -.






Installing

- Install in reverse order of removal.