Brake Pedal Overview

Brake Pedal Overview

The path of the brake pedal must not be shortened via extra floor mats.

Before installing, lubricate all mounting points with grease, part no. G 000 602.






1 Bracket

2 Self-Locking Nut

• 25 Nm

3 Brake Lamp Switch (F)

• Includes brake pedal switch (F47).

• On vehicles from CW 45/05, brake lamp switch (F) is located on brake master cylinder, refer to=> [ Brake Booster and Master Cylinder Overview ] Brake Booster and Master Cylinder Overview.

• Clip brake pedal at pressure rod of brake booster before installing brake light switch => [ ] Brake Pedal, Separating from Brake Booster.

• Lubricate tappet head with polycarbamide grease G 052 142 A2.

• Brake light switch, removing and installing, refer to => [ Brake Lamp Switch (F), through 04 November 2005 ] Brake Lamp Switch (F), through 04 November 2005.

4 Bolt

5 Brake Pedal

6 Cover

7 Bearing Shell

8 Mount

• For the ball head on the brake booster push rod.

9 Self-Locking Nut

• 25 Nm

10 Bearing Bushing

11 Bearing Pin