Intake Manifold Overview
Intake Manifold Overview
• The illustration shows the upper and lower left manifolds.
1 Clamp
• 5.5 Nm
• Reinforced.
2 Throttle Valve Control Module (J338)
3 O-ring
• Always replace.
4 Bolt
• 9 Nm
• Tighten in a diagonal sequence and in steps.
5 Bolt
• 9 Nm
6 Gasket
• Always replace.
7 Connecting Pipe for Exhaust Gas Recirculation (EGR)
8 Upper Intake Manifold
• Removing and installing, refer to => [ Upper Intake Manifold ] Upper Intake Manifold.
9 Seal
• Always replace.
10 Plug
• 10 Nm
11 Bolt
• 9 Nm
12 Ball Stud
• 5 Nm
13 Bolt
• 9 Nm
14 Gasket
• Always replace.
15 Intake Flap Motor
• Cylinder bank 1 (right side): Intake flap motor.
• Cylinder bank 2 (left side): Intake flap motor 2.
16 Bolt
• 10 Nm
17 Clip
18 Connecting Rod
19 Support
20 Lower Intake Manifold
21 Gasket
• Always replace.
22 Charge Air Hose
• Must be free of oil and grease when installing.