Transmission Fluid Cooler Overview

Transmission Fluid Cooler Overview






1 Transmission Fluid Cooler

• Removing and installing, refer to => [ Transmission Fluid Cooler ] Transmission Fluid Cooler.

2 Supply Line

• Attached to the cooler with a "quick release coupling".

3 Return Line

• Attached to the cooler with a "quick release coupling".

4 Bolt

• 9 Nm

5 Seal

• Square silicone ring.

• Replace the "quick release coupling seal kit" if there are leaks. Refer to => [ Quick Release Coupling Seal Kit ] Quick Release Coupling Seal Kit.

• Install using transmission fluid.

6 Seal

• O-ring

• Replace the "quick release coupling seal kit" if there are leaks. Refer to => [ Quick Release Coupling Seal Kit ] Quick Release Coupling Seal Kit.

• Install using transmission fluid.

7 Clip

• Pay attention to the installed position, refer to => [ Clip Installed Position ] Quick Release Coupling Seal Kit.

• Secures the "quick release coupling", must not be overstretched.

• Replace the clamp if it is overstretched. Refer to => [ Quick Release Coupling Seal Kit ] Quick Release Coupling Seal Kit.

8 Seal

• Install using transmission fluid.

9 Transmission

10 Thermostat

11 Bracket

12 Bolt

• 20 Nm

13 Bolt

• 5 Nm