Removal (from 12/2010)

POWER STEERING: VANE PUMP: REMOVAL

NOTICE:
* Do not overtighten when using a vise.
* When installing, coat the parts indicated by arrows with power steering fluid Components.
* Take care not to spill power steering fluid on the V belt.

1. REMOVE FRONT WHEEL RH

2. DRAIN POWER STEERING FLUID

3. REMOVE FRONT FENDER APRON SEAL RH

4. REMOVE FAN & GENERATOR V BELT

HINT
Removal (from 12/2010)

5. DISCONNECT OIL RESERVOIR TO PUMP HOSE NO.1

(a) Remove the clip and disconnect the oil reservoir to pump hose No.1.





6. DISCONNECT PRESSURE FEED TUBE ASSEMBLY

(a) Remove the union bolt and disconnect the pressure feed tube assembly from the vane pump assembly.





(b) Remove the bolt and separate the pressure feed tube assembly clamp.

(c) Remove the gasket from the pressure feed tube assembly.

7. REMOVE VANE PUMP ASSEMBLY

(a) Disconnect the connector from the power steering oil pressure switch.





(b) Remove the 2 bolts and the vane pump assembly.