Removal (from 12/2010)

2GR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL

1. REMOVE FRONT WHEEL RH

2. REMOVE FRONT FENDER APRON SEAL RH

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal (from 12/2010)

4. REMOVE V-RIBBED BELT

(a) Using SST, release the belt tension by turning the belt tensioner counterclockwise, and remove the V-ribbed belt from the belt tensioner.





SST : 09961-00950

(b) While turning the belt tensioner counterclockwise, align with its holes, and then insert the 5 mm bi-hexagon wrench into the holes to fix the V-ribbed belt tensioner.