Removal (from 12/2010)

SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

HINT
Precaution (from 12/2010)

2. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

3. REMOVE REAR SEAT HEADREST ASSEMBLY

4. REMOVE REAR SHELF COVER CAP Removal

5. REMOVE REAR SEATBACK ASSEMBLY LH Removal

6. REMOVE REAR SEATBACK ASSEMBLY RH Removal

7. REMOVE REAR DOOR SCUFF PLATE LH Removal (from 12/2010)

8. REMOVE REAR DOOR SCUFF PLATE RH Removal (from 12/2010)

9. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

10. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

11. REMOVE REAR SEAT SIDE GARNISH LH Removal (from 12/2010)

12. REMOVE REAR SEAT SIDE GARNISH RH Removal (from 12/2010)

13. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH Removal (from 12/2010)

14. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER RH Removal (from 12/2010)

15. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

(a) Remove the bolt and disconnect the rear seat belt assembly outer.

HINT
Use the same procedures for the RH side and LH side.





(b) Remove the nut and disconnect the rear seat inner w/ center belt assembly RH.





(c) Disengage the 4 claws and the rear seat shoulder belt cover.

HINT
Use the same procedures for the RH side and LH side.





(d) Disengage the 4 claws and the rear seat shoulder belt cover.





(e) Disengage the 5claws, 4clips, and the package tray panel assembly.





(f) Disconnect the connector and remove the package tray panel assembly.

16. REMOVE REAR SEAT BELT ASSEMBLY OUTER

(a) Remove the bolt and the rear seat belt assembly outer.