Installation (to 12/2010)

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

(a) Install the front seat inner belt assembly LH with the nut.





Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

NOTICE:
Do not overlap the anchor part of the rear belt and the protruding part of the rear seat adjuster.

(b) Driver's seat:





(1) Engage the claw and the 4 clamps.

(2) Connect the connector.

(c) Passenger's manual seat:





(1) Engage the claw and the 3 clamps.

(d) Passenger's power seat:





(1) Engage the claw and the clamp.

(2) Connect the connector.

2. INSTALL FRONT LH SEAT ASSEMBLY (for Power Seat) Installation (to 12/2010)

3. INSTALL FRONT RH SEAT ASSEMBLY (for Manual Seat) Installation (to 12/2010)

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Manual Seat)

5. PERFORM INITIALIZATION

HINT
Repair Instruction - Initialization

6. INSPECT FUNCTION OF POWER SEAT OPERATION (for Power Seat)

HINT
Front Power Seat Control System (w/o Memory)

7. CHECK SEAT SLIDE ADJUSTER LOCKS (for Manual Seat) Installation (to 12/2010)

8. CHECK SEAT HEATER OPERATION (w/ Seat Heater System)

9. INITIALIZE FRONT PASSENGER OCCUPANT CLASSIFICATION SYSTEM (for Front Passenger Seat)

HINT
Repair Instruction - Initialization

10. INSPECT SRS WARNING LIGHT

HINT
Diagnosis System (to 12/2010)