Removal (to 12/2010)

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.

1. PRECAUTION

CAUTION:
Be sure to read the "PRECAUTION" thoroughly before servicing Precaution (to 12/2010).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

3. REMOVE ROOF HEADLINING ASSEMBLY

HINT
Refer to the procedures up to "REMOVE ROOF HEADLINING ASSEMBLY" Removal (to 12/2010).

4. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH

(a) Remove the curtain shield airbag assembly LH in order shown in the illustration.

(1) Remove the 9 bolts in order of A to I.





(b) Disconnect the connector from the curtain shield airbag assembly LH.

NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.