Warning Light Check

Warning Light Check

ESP(R) Warning Light Check

1) Push engine switch to change the ignition mode of keyless push start system to "ON".
2) Check that ESP(R) warning light (1) comes ON for about 2 seconds and then goes OFF.

If ESP(R) warning light never lights up, go to ESP Warning Light Does Not Come ON after Pressing Engine Switch to Change the Ignition Mode of Keyless Push Start System to "ON ESP(R) Warning Light Does Not Come ON after Pressing Engine Switch to Change the Ignition Mode of Keyless Push Start System to "ON". If ESP(R) warning light remains ON and no DTC is stored in ESP(R) control module, go to ESP Warning Light Comes ON Steady ESP(R) Warning Light Comes ON Steady.






ABS Warning Light

1) Push engine switch to change ignition mode of keyless push start system to "ON".
2) Check that ABS warning light (1) comes ON for about 2 seconds and then goes OFF. If ABS warning light never lights up, go to ABS Warning Light Does Not Come ON after Pressing Engine Switch to Change the Ignition Mode of Keyless Push Start System to "ON ABS Warning Light Does Not Come ON after Pressing Engine Switch to Change the Ignition Mode of Keyless Push Start System to "ON". If ABS warning light remains ON and no DTC is stored in ABS control module, go to ABS Warning Light Comes ON Steady ABS Warning Light Comes ON Steady.






EBD Warning Light (Brake Warning Light)

NOTE:

Perform this check on a level place.

1) Check brake fluid level. Brake Fluid Level Inspection
2) Pull parking brake lever.
3) Push engine switch to change ignition mode of keyless push start system to "ON".
4) Check that EBD warning light (brake warning light) (1) comes ON. If EBD warning light (brake warning light) never lights up, go to EBD Warning Light (Brake Warning Light) Does Not Come ON after Pressing Engine Switch to Change Ignition Mode to "ON" EBD Warning Light (Brake Warning Light) Does Not Come ON after Pressing Engine Switch to Change Ignition Mode to "ON".





5) Release parking brake lever and check that EBD warning light goes OFF. If EBD warning light (brake warning light) remains ON and no DTC is stored in ABS control module, go to EBD Warning Light (Brake Warning Light) Comes ON Steady EBD Warning Light (Brake Warning Light) Comes ON Steady.