EBD Warning Light (Brake Warning Light) Does Not Come ON after Pressing Engine Switch to Change Ignition Mode to "ON"

EBD Warning Light (Brake Warning Light) Does Not Come ON after Pressing Engine Switch to Change Ignition Mode to "ON"

Circuit Diagram

Refer to "Circuit Diagram" under ESP Warning Light Does Not Come ON after Pressing Engine Switch to Change the Ignition Mode of Keyless Push Start System to "ON ESP (R) Warning Light Does Not Come ON after Pressing Engine Switch to Change the Ignition Mode of Keyless Push Start System to "ON".

Circuit Description

Refer to "Circuit Description" under EBD Warning Light (Brake Warning Light) Comes ON Steady EBD Warning Light (Brake Warning Light) Comes ON Steady.

Troubleshooting


1. Warning light check
Push engine switch to change ignition mode of keyless push start system to "ON".
Does not "ABS" warning light come ON steady?
YES
Perform "ABS Warning Light Come ON Steady.
NO
Go to Step 2.
2. Scan tool parameter check
Select "Indicator" function in "Active test".
Dose EBD warning light come ON?
YES
Substitute a known-good ESP (R) control module and recheck DTC. ESP Hydraulic Unit / Control Module Assembly Removal and Installation
NO
Substitute a known-good combination meter and recheck DTC.