Installation

K41B CVT: SHIFT LEVER: INSTALLATION

1. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

(a) Install the shift lever knob onto the shift lever.

2. INSTALL SHIFT LEVER ASSEMBLY

(a) Install the shift lever with the 4 bolts.

Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)

NOTICE:
Make sure that the instrument panel wire is not caught under the shift lever.

(b) Engage the 4 clamps and install the instrument panel wire onto the shift lever.

(c) Connect the 2 connectors to the shift lever.

3. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Rotate the transmission control cable nut counterclockwise 180° and push in the lock while holding the nut.





Text in Illustration





(b) Install the transmission control cable's cable outer onto the shift lever plate.





Text in Illustration





NOTICE:
After installation, check that the cable outer lock extends past the line A-A, as shown in the diagram.

(c) Confirm that the shift lever is in N and install the cable end to the shift lever.

NOTICE:
* Push the cable end to the base of the pin to be sure that it is installed securely.
* Install the cable end adjustment mechanism so that the lock faces the driver seat.

4. INSPECT SHIFT LEVER POSITION Initial Inspection and Diagnostic Overview

5. ADJUST SHIFT LEVER POSITION Adjustments

6. INSTALL REAR CONSOLE BOX ASSEMBLY

Installation