Removal

LIGHTING (EXT): TURN SIGNAL FLASHER ASSEMBLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

(a) Remove the upper instrument panel sub-assembly Removal.

3. REMOVE POWER STEERING ECU ASSEMBLY Removal

4. REMOVE TURN SIGNAL FLASHER ASSEMBLY

(a) Disconnect the connector.





(b) Detach the clip and remove the turn signal flasher.