Removal

METER / GAUGE / DISPLAY: COMBINATION METER: REMOVAL

1. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

3. REMOVE METER HOOD SUB-ASSEMBLY Removal

4. REMOVE COMBINATION METER ASSEMBLY





(a) Remove the screw.

(b) Detach the 2 claws.

NOTICE:
* Hold the part labeled A in the illustration and detach the claws.
* Do not hold the part labeled B in the illustration.





(c) Disconnect the connector and remove the combination meter.