VSC OFF Indicator Light Does Not Come ON

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: VSC OFF Indicator Light does not Come ON
- VSC OFF Indicator Light does not Come ON

DESCRIPTION

Refer to VSC OFF Indicator Light Remains ON VSC OFF Indicator Light Remains ON.

WIRING DIAGRAM

Refer to VSC OFF Indicator Light Remains ON VSC OFF Indicator Light Remains ON.

INSPECTION PROCEDURE

NOTICE:
When replacing the brake actuator assembly, perform calibration Programming and Relearning.

PROCEDURE

1. CHECK CAN COMMUNICATION SYSTEM ABS Warning Light Remains ON

B -- GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) How to Proceed With Troubleshooting
A -- Continue to next step.

2. INSPECT VSC OFF SWITCH TRAC OFF Indicator Light Remains ON

NG -- REPLACE VSC OFF SWITCH Removal
OK -- Continue to next step.

3. CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - VSC OFF SWITCH) TRAC OFF Indicator Light Remains ON

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

4. READ VALUE USING TECHSTREAM (TRAC/VSC OFF MODE) TRAC OFF Indicator Light Remains ON

NG -- REPLACE BRAKE ACTUATOR ASSEMBLY Removal

OK -- GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) How To Proceed With Troubleshooting