P2716

U760E AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSAXLE SYSTEM: P2716: Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT)
P2716 - Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT)

DESCRIPTION

Refer to DTC P2714 P2714.





MONITOR DESCRIPTION

When an open or short in the shift solenoid valve SLT circuit is detected, the TCM interprets this as a fault. The TCM will turn on the MIL and store the DTC.

MONITOR STRATEGY





TYPICAL ENABLING CONDITIONS

ALL





Malfunction (A)





Malfunction (B)





Malfunction (C)





Malfunction (D)





Malfunction (E)





TYPICAL MALFUNCTION THRESHOLDS

Malfunction (A) and (B)





Malfunction (C)





Malfunction (D)





Malfunction (E)





COMPONENT OPERATING RANGE





WIRING DIAGRAM





INSPECTION PROCEDURE

NOTICE:
Perform the universal trip to clear permanent DTCs Reading and Clearing Diagnostic Trouble Codes.

PROCEDURE

1. INSPECT TRANSMISSION WIRE (SHIFT SOLENOID VALVE SLT)

(a) Remove the TCM.





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- INSPECT SHIFT SOLENOID VALVE SLT

OK -- REPLACE TCM Removal

2. INSPECT SHIFT SOLENOID VALVE SLT P2714

NG -- REPLACE SHIFT SOLENOID VALVE SLT Disassembly

OK -- REPLACE TRANSMISSION WIRE Removal