Installation

INTERIOR: ROOF HEADLINING: INSTALLATION

HINT

A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL ROOF HEADLINING ASSEMBLY





(a) Attach the wire harness to the headlining with tape as shown in the illustration.

HINT

Be careful that dirt and foreign matter do not contaminate the tape's adhesive.

(b) Attach the roof wire harness with tape.

NOTICE:

Attach the roof wire harness securely.

(c) Attach the 26 fasteners to install the headlining.





(d) Install the 2 clips.

2. INSTALL COAT HOOK

(a) Install the coat hook with the bolt and attach the claw.





3. INSTALL ASSIST GRIP SUB-ASSEMBLY

(a) Attach the 4 claws to install the assist grip.





4. INSTALL ASSIST GRIP COVER

(a) Attach the 4 claws to install the 2 covers.





5. INSTALL VISOR HOLDER LH

(a) Install the visor holder by turning it clockwise.

6. INSTALL VISOR HOLDER RH

(a) Install the visor holder by turning it clockwise.

7. INSTALL LH VISOR ASSEMBLY

(a) Install the visor with the 2 screws.

8. INSTALL RH VISOR ASSEMBLY

(a) Install the visor with the 2 screws.

9. INSTALL NO. 2 ROOM LIGHT ASSEMBLY

(a) Attach the light to the deck trim side panel LH.

10. INSTALL NO. 1 ROOM LIGHT ASSEMBLY

(a) Connect the room light connector.

(b) Attach the 4 claws to install the light.





(c) Attach the 4 claws to install the lens.





11. INSTALL MAP LIGHT ASSEMBLY

(a) Connect the map light connector.

(b) Attach the 3 clips to install the light.





12. INSTALL FRONT PILLAR GARNISH LH

(a) Remove the protective cover.





(b) Attach the 2 clips to install the garnish.





HINT

Clip B cannot be reused.

13. INSTALL FRONT PILLAR GARNISH RH

HINT

Use the same procedures described for the LH side.

14. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH

(a) Attach the 4 clips to install the garnish.





HINT

Clip B cannot be reused.

15. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER RH

HINT

Use the same procedures described for the LH side.

16. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

(a) Attach the 4 claws and 4 clips to install the side panel.





(b) Install the rope hook with the bolt.

(c) Install the luggage hook.

17. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

HINT

Use the same procedures described for the LH side.

18. INSTALL ROOF SIDE GARNISH INNER LOWER LH

(a) Attach the 5 clips to install the garnish.





19. INSTALL ROOF SIDE GARNISH INNER LOWER RH

HINT

Use the same procedures described for the LH side.

20. INSTALL CENTER PILLAR GARNISH LH

(a) Attach the 2 claws and clip to install the garnish.





(b) Install the 2 screws.

21. INSTALL CENTER PILLAR GARNISH RH

HINT

Use the same procedures described for the LH side.

22. INSTALL NO. 1 SIDE TRIM ASSEMBLY LH

(a) Attach the 3 claws and 8 clips to install the trim.





(b) Attach the clip labeled A.

(c) Install the hook.

(d) Install the 2 floor anchor bolts (front and rear seat belt).

23. INSTALL NO. 1 SIDE TRIM ASSEMBLY RH

HINT

Use the same procedures described for the LH side.

24. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

25. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

26. INSTALL REAR SEATBACK ASSEMBLY LH Installation

27. INSTALL REAR SEATBACK ASSEMBLY RH Installation

28. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

29. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

(a) Attach the 2 clips to install the trim.





(b) Install the cap nut.

30. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT

Use the same procedures described for the LH side.

31. INSTALL FRONT DOOR SCUFF PLATE LH

(a) Attach the 10 claws to install the scuff plate.





32. INSTALL FRONT DOOR SCUFF PLATE RH

HINT

Use the same procedures described for the LH side.

33. INSTALL FRONT DOOR SCUFF PLATE OUTSIDE LH

(a) Attach the 4 clips to install the scuff plate.





34. INSTALL FRONT DOOR SCUFF PLATE RH

HINT

Use the same procedures described for the LH side.

35. INSTALL REAR NO. 1 FLOOR BOARD

(a) Attach the clip to install the board.





36. INSTALL NO. 1 DECK BOARD

(a) Attach the 4 clips to install the deck board.





(b) Install the rope hook with the bolt.

37. INSTALL DECK FLOOR BOX REAR

38. INSTALL DECK FLOOR BOX LH

(a) Install the box with the 2 clips.

39. INSTALL DECK FLOOR BOX RH

(a) Install the box with the 2 clips.

40. INSTALL SPARE WHEEL COVER ASSEMBLY

41. INSTALL BACK DOOR WEATHERSTRIP

42. INSTALL BACK DOOR SCUFF PLATE

(a) Attach the 4 clips to install the scuff plate.





43. INSTALL DECK BOARD SUB-ASSEMBLY

44. INSTALL TONNEAU COVER ASSEMBLY