Installation

2AZ-FE COOLING: THERMOSTAT: INSTALLATION

INSTALLATION

1. INSTALL THERMOSTAT
(a) Install a new gasket onto the thermostat.





(b) Install the thermostat with the jiggle valve upward.
HINT: The jiggle valve may be set to within 10° on either side of the prescribed position.

2. INSTALL INLET WATER





(a) Install the inlet water with the 2 nuts.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
3. CONNECT OUTLET RADIATOR HOSE Installation
4. ADD ENGINE COOLANT Service and Repair
5. INSPECT FOR COOLANT LEAK Testing and Inspection
6. INSTALL NO. 1 ENGINE UNDER COVER