Air Door Actuator / Motor: Service and Repair

Air Inlet Valve Actuator Replacement

Removal Procedure

1. Remove the blower case assembly. Refer to Blower Case Replacement (Blower Case Replacement).




2. Remove the connector.
3. Remove the two screws (2) and the air inlet actuator (1) from the blower case.

Installation Procedure




1. Install the two screws (2) and the air inlet actuator (1) to the blower case.
2. Connect the connector.
3. Install the blower case assembly. Refer to Blower Case Replacement (Blower Case Replacement).