Parking Brake Lever: Service and Repair

Parking Brake Lever Replacement

Removal Procedure

1. Remove the rear floor console. Refer to Rear Floor Console Replacement (Rear Floor Console Replacement).
2. Remove the park brake front cable from the park brake lever. Refer to Parking Brake Front Cable Replacement (Parking Brake Front Cable Replacement).
3. Remove the park brake switch. Refer to Parking Brake Indicator Switch Replacement (Service and Repair).




4. Remove the 2 bolts (1, 2) and the park brake lever.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the park brake lever (3) with the 2 bolts (1, 2) and tighten to 15 Nm (11 lb ft).
2. Install the park brake switch. Refer to Parking Brake Indicator Switch Replacement (Service and Repair).
3. Install the park brake front cable to the park brake lever. Refer to Parking Brake Front Cable Replacement (Parking Brake Front Cable Replacement).
4. Adjust the park brake system. Refer to Parking Brake Adjustment (All Wheel Drive and GT) (Adjustments)Parking Brake Adjustment (Except All Wheel Drive and GT) (Adjustments).
5. Install the rear floor console. Refer to Rear Floor Console Replacement (Rear Floor Console Replacement).