Removal and Installation

CSC (CONCENTRIC SLAVE CYLINDER)

Removal and Installation


REMOVAL

1.Remove transaxle assembly. Removal And Installation.





2.Remove CSC bolts and the CSC from clutch housing.

INSTALLATION

1.Install CSC to clutch housing and then tighten bolts to specification. Exploded View.

CAUTION:
- Do not reuse CSC.
- Do not insert and operate CSC because piston and stopper of CSC components may fall off.
2.Install transaxle assembly. Removal And Installation.
3.Bleed the air from the clutch hydraulic system. Service and Repair.