Luggage Side Lower Finisher

LUGGAGE FLOOR TRIM

LUGGAGE SIDE LOWER FINISHER : Removal and Installation


REMOVAL


CAUTION:
- When removing, always use a remover tool that is made of plastic.
- Never damage the body.
1.Remove luggage room lamp. Removal And Installation.
2.Remove luggage floor board.
3.Remove luggage floor box.(Models with 2WD)
4.Remove luggage rear plate. Luggage Rear Plate.
5.Remove rear body side welt. Body Side Welt.
6.Remove rear seat cushion. Seat Cushion.
7.Remove rear seat back. Seatback.
8.Remove side hinge of seatback hinge. Seatback Hinge.





9.Disengage luggage side lower finisher fixing clips with a remover tool (A), and then remove luggage side lower finisher.

Broken circle indicates : Clip


INSTALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:
When installing luggage side lower finisher, check that clips are securely in body panel holes, and press them in.

Removal and Installation of Shock Absorber Mask


CAUTION:
When removing, always use a remover tool that is made of plastic.
REMOVAL





1.Disengage shock absorber mask fixing pawls with a remover tool (A), and then remove shock absorber mask.

Broken triangle indicates : Pawl


CAUTION:
Apply protective tape (B) on the parts to protect it from damage.
INSTALLATION
Install in the reverse order of removal.

Removal and Installation of Luggage Side Lower Finisher Grille


CAUTION:
When removing, always use a remover tool that is made of plastic.
REMOVAL





Disengage luggage side lower finisher grille fixing pawls with a remover tool (A), and then remove luggage side lower finisher grille.

Broken triangle indicates : Pawl


CAUTION:
Apply protective tape (B) on the parts to protect it from damage.
INSTALLATION
Install in the reverse order of removal.