Seatback Hinge

REAR SEAT

SEATBACK HINGE : Removal and Installation


CENTER HINGE

Removal
1.Remove seatback LH and RH from the vehicle.
Seatback.
2.Remove seat cushion from the vehicle.
Seat Cushion.
3.Remove center hinge mounting bolts, and then remove center hinge from the vehicle.
Installation
Note the following items, and install in the reverse order of removal.

CAUTION:
When installing center hinge, tighten mounting bolts to the specified torque according to the numerical order as shown in the figure





1.Temporarily tighten mounting bolt (1).
2.Tighten mounting bolts in numerical order (2 and 3 as shown in the figure) to the specified torque.
For the specified torque, Exploded View.

White arrow indicates : Vehicle front


SIDE HINGE

Removal
1.Remove seatback from the vehicle.
Seatback.
2.Remove side hinge mounting bolt, and then remove side hinge from luggage side lower finisher.
Installation
Installation is the reverse order of removal. Tighten bolts to the specified torque.
For the specified torque, Exploded View.