Coupe

CONDENSER

Removal and Installation - Coupe


REMOVAL

1.Remove the rear seat cushion and the rear seatback. Coupe.
2.Partially remove the door welt.
3.Remove the following trim components. Removal And Installation Coupe.
- rear kick plate
- rear lower finisher
- upper pillar finisher
- rear pillar finisher
4.Remove the D-ring anchor bolt cover and the D-ring assembly. Exploded View.





5.Disconnect condenser electrical connectors (A). remove bolt (B), and the condenser (1) from the vehicle body.
6.Remove the bolt (B), and the condenser (1) from the vehicle body.

INSTALLATION

Installation is in the reverse order of removal.