Check At Idle

ROAD TEST

Check at Idle


1. CHECK STARTING THE ENGINE

1.Park vehicle on flat surface.
2.Move CVT shift selector to "P" or "N" position.
3.Turn ignition switch OFF.
4.Turn ignition switch to "START" position.
Is engine started?
YES- GO TO 2.
NO- Stop "Road Test". CVT RE0F10A.

2. CHECK STARTING THE ENGINE

1.Turn ignition switch ON.
2.Move CVT shift selector to "D", "M" or "R" position.
3.Turn ignition switch to "START" position.
Is engine started?
YES- Stop "Road Test". CVT RE0F10A.
NO- GO TO 3.

3. CHECK "P" POSITION FUNCTION

1.Move CVT shift selector to "P" position.
2.Turn ignition switch OFF.
3.Release parking brake.
4.Push vehicle forward or backward.
5.Apply parking brake.
Does vehicle move when it is pushed forward or backward?
YES- CVT RE0F10A. Continue "Road Test".
NO- GO TO 4.

4. CHECK "N" POSITION FUNCTION

1.Start engine.
2.Move CVT shift selector to "N" position.
3.Release parking brake.
Does vehicle move forward or backward?
YES- CVT RE0F10A. Continue "Road Test".
NO- GO TO 5.

5. CHECK SHIFT SHOCK

1.Apply foot brake.
2.Move CVT shift selector to "R" position.
Is there large shock when changing from "N" to "R" position?
YES- CVT RE0F10A. Continue "Road Test".
NO- GO TO 6.

6. CHECK "R" POSITION FUNCTION

Release foot brake for several seconds.
Does vehicle creep backward when foot brake is released?
YES- GO TO 7.
NO- Refer toCVT RE0F10A. Continue "Road Test".

7. CHECK "D" POSITION FUNCTION

Move CVT shift selector to "D" position and check if vehicle creeps forward.
Does vehicle creep forward in all positions?
YES- Go to Cruise Test.
NO- Stop "Road Test". CVT RE0F10A.