Cruise Test

ROAD TEST

Cruise Test


1. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 1

1.Drive vehicle for approximately 10 minutes to warm engine oil and CVT fluid up to operating temperature.
CVT fluid operating temperature:50 - 80�C (122 - 176�F)
2.Park vehicle on flat surface.
3.Move CVT shift selector to "P" position.
4.Start engine.
5.Move CVT shift selector to "D" position.






6.Accelerate vehicle to 2/8-way throttle depressing accelerator pedal constantly.
Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
OK or NG
OK- GO TO 2.
NG- CVT RE0F10A. Continue "Road
Test".

2. CHECK VEHICLE SPEED WHEN SHIFTING GEARS - PART 2

1.Park vehicle on flat surface.
2.Move CVT shift selector to "D" position.





3.Accelerate vehicle to full depression depressing accelerator pedal constantly.
Read vehicle speed and engine speed.Vehicle Speed When Shifting Gears.
OK or NG
OK - GO TO 3.
NG- CVT RE0F10A. Continue "Road
Test".

3. CHECK MANUAL MODE FUNCTION

Move to manual mode from "D" position.
Does it switch to manual mode?
YES- GO TO 4.
NO- CVT RE0F10A. Continue "Road Test".

4. CHECK SHIFT-UP FUNCTION

During manual mode driving, is upshift from M1 --> M2 --> M3 --> M4 --> M5 --> M6 performed?
Read the gear position. CONSULT Function (Transmission).
Is upshifting correctly performed?
YES- GO TO 5.
NO- CVT RE0F10A. Continue "Road Test".

5. CHECK SHIFT-DOWN FUNCTION

During manual mode driving, is downshift from M6 --> M5 --> M4 --> M3 --> M2 --> M1 performed?
Read the gear position. CONSULT Function (Transmission).
Is downshifting correctly performed?
YES- GO TO 6.
NO- CVT RE0F10A. Continue "Road Test".

6. CHECK ENGINE BRAKE FUNCTION

Check engine brake.
Does engine braking effectively reduce speed in M1 position?
YES- 1.Stop the vehicle.
2.Perform self-diagnosis.
NO- CVT RE0F10A. then continue trouble diagnosis.