Removal and Replacement

CLUTCH PEDAL


Removal and Installation


COMPONENTS











REMOVAL
1. Remove instrument panel lower finisher. Removal And Installation.
2. Remove front upper floor duct. Service and Repair.
3. Disconnect ASCD clutch switch harness connector (if equipped).





4. Disconnect master cylinder rod end from clutch pedal lever.
5. Remove clutch pedal assembly nuts, and then remove clutch pedal assembly.
6. Disconnect clutch interlock switch harness connector.

INSPECTION AFTER REMOVAL
Check clutch pedal for bend, damage or a cracked weld. If bend, damage or a cracked weld is found, replace clutch pedal assembly.

INSTALLATION
Installation is in the reverse order of removal.
- After installing the clutch switches, adjust the switch positions. Adjustments.