Back Door Side Finisher

BACK DOOR TRIM

BACK DOOR SIDE FINISHER : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
- Never damage the back door panel.

REMOVAL

1.Remove rear parcel shelf finisher. Refer to "REAR PARCEL SHELF FINISHER : Removal and Installation" Rear Parcel Shelf Finisher.
2.Remove back door upper finisher. Refer to "BACK DOOR UPPER FINISHER : Removal and Installation" Back Door Upper Finisher.
3.Remove back door side finisher.





a.Apply protective tape (A) on the parts to protect it from damage.





b.Disengage back door side finisher fixing metal clips with a remover tool (A), and then remove back side finisher.


INSTALATION

Note the following item, and install in the reverse order of removal.

CAUTION:
When installing, check in advance that metals clip are accurately aligned with the holes on back door side, and then install by pressing in.