Back Door Upper Finisher

BACK DOOR TRIM

BACK DOOR UPPER FINISHER : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
- Never damage the back door panel.

REMOVAL

1.Fully open back door.
2.Remove back door upper finisher.





a.Apply protective tape (A) on the parts to protect it from damage.





b.Disengage back door upper finisher fixing clips and pawls with a remover tool (A), and then remove back door upper finisher.

INATALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:
When installing, check in advance that clips and pawls are accurately aligned with the holes on back door side, and then install by pressing in.