Back Door Lower Finisher

BACK DOOR TRIM

BACK DOOR LOWER FINISHER : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
- Never damage the back door panel.

REMOVAL

1.Fully open back door.
2.Remove back door side finisher. Refer to "BACK DOOR SIDE FINISHER : Removal and Installation" Back Door Side Finisher.
3.Remove back door pull handle. Refer to "BACK DOOR PULL HANDLE : Removal and Installation" Back Door Pull Handle.
4.Remove back door finisher.





a.Apply protective tape (A) on the parts to protect it from damage.





b.Remove back door lower fixing clips (A).





c.Disengage back door lower finisher fixing clips with a remover tool (A), and then remove back door lower finisher.


INATALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:
When installing, check in advance that clips are accurately aligned with the holes on back door side, and then install by pressing in.