Wiper Motor: Service and Repair

FRONT WIPER AND WASHER SYSTEM


Removal and Installation of Front Wiper Drive Assembly







REMOVAL
1. Turn wiper switch on to operate wiper motor, then turn wiper switch off (auto stop).
2. Remove wiper arms. Refer to Service and Repair.
3. Remove cowl top cover. Refer to Service and Repair.
4. Remove cowl extension. Refer to Service and Repair.
5. Disconnect wiper motor connector.
6. Remove front wiper drive assembly bolts, and remove front wiper drive assembly.
7. Remove the two wiper motor screws and remove the wiper motor.

INSTALLATION
1. Install the wiper motor.
2. Install front wiper drive assembly.
3. Connect wiper motor connector. Turn wiper switch on to operate wiper motor, then turn wiper switch off (auto stop).
4. Install cowl extension. Refer to Service and Repair.
5. Install cowl top cover. Refer to Service and Repair.
6. Install the wiper arms. Refer to Service and Repair.