Adjustment Of CVT Position

SHIFT CONTROL SYSTEM


Adjustment of CVT Position


CAUTION:
Make sure that parking brake is applied before adjustment.
1. Loosen the control cable nut and place the manual lever in "P" position.
2. Place selector lever in "P" position.
3. Temporarily tighten the control cable nut.

NOTE:
Do not move the manual lever. Make sure the manual lever stays in the "P" position.
4. Tighten the control cable nut.

Control cable nut: Refer to Removal and Installation.


CAUTION:
Secure the manual lever when tightening nut.
5. Check the operation of the CVT. Refer to Testing and Inspection.