Radiator: Service and Repair

Radiator

Radiator (View 1 of 2)









Radiator (View 2 of 2)









1. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding Cooling System Draining, Filling and Bleeding.

2. Remove the cooling fan motor and shroud. For additional information, refer to Cooling Fan Motor and Shroud Service and Repair.

3. Disconnect the upper radiator hose from the radiator.

4. Disconnect the radiator-to-degas bottle hose from the radiator.

5. Disconnect the lower radiator hose from the radiator.

6. Remove the A/C tubes retainer bolt.
- To install, tighten to 7 Nm (62 lb-in).

7. Remove the 2 bolts from the upper radiator support brackets and position the radiator towards the engine and remove the 2 upper radiator support bracket from the radiator.
- To install, tighten to 10 Nm (89 lb-in).

8. Remove the A/C condenser-to-radiator pin-type retainer.





9. Squeeze the tabs and separate the A/C condenser from the radiator.
- Remove the radiator.





10. To install, reverse the removal procedure.

11. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding Cooling System Draining, Filling and Bleeding.