Removal and Replacement

Illustrated On Model 124 Sedan/Coupe:

Removing, installing


DANGER: Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel.

- No fire, sparks, naked flame and smoking. Pour fuels only into suitable and appropriately marked vessels. Wear protective clothing when handling fuel.


1 Drain fuel tank, fill.
- Refer to Fuel Tank 2 below

2 Remove fuel tank paneling as well as left and right side paneling in trunk
3 Remove fuel hose on intake side (53), fuel return hose (74) and vent line (76/1)


NOTE: Collect remaining fuel, seal connections


Refer to Special Tool below
Refer to Fuel Tank 1 below

4 Remove fuel tank (75)
- Model 124.008/02/032/052
- Model 124.086/092
- Model 124.066
- Model 129 Removal and Replacement
- Model 140

5 Check insulating strips (75/5)
- Replace if necessary. Glue on insulating strips (self adhesive)

6 Remove fuel strainer (26)
- Clean and check for reusability
- Refer to Fuel Tank 1 below


NOTE: The splash bowl in the fuel tank is secured against turning with 2 pins. It is attached together with the fuel strainer (26)


7 Replace O-ring (26/1)
- Oil to facilitate installation

8 Install in the reverse order
9 Dispose of fuel tank

Fuel Tank, Part 2:

Fuel Tank, Part 1: