Clearing DTC - Bluetooth System (Hands-Free Telephone (HF/TEL) System)

CLEARING DTC [Bluetooth SYSTEM (HANDS-FREE TELEPHONE (HF/TEL) SYSTEM)]

CAUTION:
- Before clearing the DTCs, be sure to enter all of the DTCs displayed in the DTC inspection in the Audio Repair Order Form.

Using the M-MDS

1. Connect the M-MDS (IDS) to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the IDS.

- Select "Self Test".
- Select "Modules".
- Select "ACU".

3. Verify the DTC according to the directions on the screen.

4. Press the clear button on the DTC screen to clear the DTC.

5. Switch the ignition to off.

6. Switch the ignition to ON and wait for 5 s or more.

7. Perform DTC inspection. DTC Inspection - Bluetooth System (Hands-Free Telephone (HF/TEL) System)

8. Verify that no DTCs are displayed.

Without Using M-MDS (On-board Diagnostic Test Mode)

1. Launch the on-board diagnostic test mode. DTC Inspection - Bluetooth System (Hands-Free Telephone (HF/TEL) System)

2. While pressing the AUTO-M switch, simultaneously press the PRESET switch 4 for 3 s or more.






3. To stop the on-board diagnostic test mode, ignition is switched to off.