Removal

AA80F AUTOMATIC TRANSMISSION: FLOOR SHIFT ASSEMBLY: REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
* After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE CONSOLE BOX ASSEMBLY

(a) Remove the console box Removal.

4. REMOVE NO. 1 CONSOLE BOX DUCT

(a) Remove the 2 screws and pull out the duct to remove it.

5. REMOVE FRONT EXHAUST PIPE ASSEMBLY

(a) Remove the front exhaust pipe Removal.

6. REMOVE FRONT FLOOR NO. 1 HEAT INSULATOR Removal

7. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY





(a) Move the shift lever to N.

(b) Remove the nut and disconnect the shifting rod from the connecting rod swivel.

8. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY





(a) Disconnect the 2 connectors.

(b) Detach the 6 wire harness clamps from the floor shift.

(c) Remove the 4 bolts and floor shift.