Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE ROOF HEADLINING ASSEMBLY

(a) Remove the roof headlining for standard body Removal.

(b) Remove the roof headlining for long body Removal.

3. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY (w/ Antenna)





(a) Disconnect the receiver connector.

(b) Remove the nut and receiver.