Red Indicator Remains On

CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: RED INDICATOR REMAINS ON
- RED INDICATOR REMAINS ON

DESCRIPTION

This means that the DCM (telematics transceiver) has detected a malfunction in the Safety Connect System and stores a DTC.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK FOR DTC

(a) Turn the engine switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the engine switch on (IG) and wait for 10 seconds.

(d) Perform "Health Check" and check for current DTCs Health Check.

Result





B -- GO TO DIAGNOSTIC TROUBLE CODE CHART Safety Connect System
A -- Continue to next step.

2. REPLACE DCM (TELEMATICS TRANSCEIVER)

(a) Replace the DCM (telematics transceiver) Removal.

NOTICE:
* The engine switch must be off.
* Do not replace the DCM (telematics transceiver) with one from another vehicle.

NEXT -- PERFORM DCM ACTIVATION DCM Activation