Removal

1UR-FSE COOLING: THERMOSTAT: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal

3. REMOVE NO. 1 AIR CLEANER INLET Removal

4. REMOVE ENGINE ROOM SIDE COVER RH Removal

5. REMOVE NO. 1 ENGINE UNDER COVER Service and Repair

6. DRAIN ENGINE COOLANT Service and Repair

7. REMOVE RADIATOR RESERVOIR ASSEMBLY





(a) Disconnect the 2 reservoir hoses.

(b) Remove the 2 bolts and reservoir.

8. DISCONNECT NO. 2 RADIATOR HOSE

9. REMOVE WATER INLET SUB-ASSEMBLY WITH THERMOSTAT





(a) Remove the 3 nuts, water inlet with thermostat and gasket.