Removal

AUDIO / VISUAL: PILLAR SPEAKER (for Quarter): REMOVAL

HINT
* Use the same procedures for the LH side and RH side.
* The procedures listed below are for the LH side.

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
* w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE REAR DOOR SCUFF PLATE LH

(a) for Standard Body:

(1) Remove the rear door scuff plate LH Removal.

(b) for Long Body:

(1) Remove the rear door scuff plate LH Removal.

4. REMOVE REAR SEAT ASSEMBLY

(a) for Power Seat:

Remove the rear seat assembly Removal.

(b) for 4-Passenger with Ottoman:

Remove the rear seat assembly Removal.

(c) for 5-Passenger with Ottoman:

Remove the rear seat assembly Removal

(d) for Fixed Seat:

Remove the rear seat assembly Removal.

5. REMOVE REAR SEAT SIDE GARNISH LH Removal

6. REMOVE ROOF SIDE GARNISH INNER LH Removal

7. REMOVE REAR HEADER SPEAKER ASSEMBLY (for 19 Speakers)





(a) Remove the 2 bolts.

(b) Detach the clip, disconnect the speaker connector and remove the speaker.

NOTICE:
Do not touch the cone part of the speaker.