Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT SEAT SIDE AIRBAG ASSEMBLY: REMOVAL

CAUTION:
* Be sure to read Precaution thoroughly before servicing Service Precautions.
* If the side airbag was deployed, replace the front seat airbag assembly, front seatback cover, separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with a new one.
* Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.
HINT
Use the same procedures for the LH side and RH side.

1. REMOVE FRONT SEAT ASSEMBLY

for Manual Seat: Removal

for Power Seat: Removal

2. REMOVE AIRBAG WIRE HARNESS (for Manual Seat)

(a) Disconnect the rubber band.

(b) Disengage the claw and 3 clamps to remove the airbag wire harness.

(d) w/ Seat Heater System:

(1) Disconnect the connector.

(2) Disengage the clamp.

3. REMOVE AIRBAG WIRE HARNESS (for Power Seat)

(a) Disconnect the rubber band.

(b) Disengage the claw and 3 clamps to remove the airbag wire harness.

(d) w/ Seat Heater System:

(1) Disconnect the connector.

(2) Disengage the clamp.

4. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

for Manual Seat: Disassembly

for Power Seat: Disassembly

5. REMOVE FRONT SEATBACK COVER

for Manual Seat: Disassembly

for Power Seat: Disassembly

6. REMOVE FRONT SEAT AIRBAG ASSEMBLY

(a) Disengage the 3 clamps.

(b) Remove the 2 nuts and the front seat airbag assembly.

CAUTION:
* The nuts must not be reused.
* Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.