Installation
INTERIOR: REAR SUNSHADE ASSEMBLY: INSTALLATION
1. INSTALL REAR SUNSHADE RELAY
(a) Install the relay with the 2 screws.
(b) Connect the connector.
(c) Attach the claw to install the relay cover.
2. INSTALL REAR WINDOW SUNSHADE ASSEMBLY
(a) Tighten the bolt A.
(b) Install the window shade with the 5 bolts.
3. INSTALL NO.2 PACKAGE TRAY TRIM PANEL ASSEMBLY
(a) Connect the connector.
(b) Attach the 5 claws and 3 clips to install the panel.
4. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
(a) Attach the clip to install the package tray trim panel.
(b) Attach the 4 claws to install the belt guide center.
(c) Attach the 4 claws to install the belt guide LH.
5. INSTALL AUTOMATIC LIGHT CONTROL SENSOR
(a) Connect the connector, and install the sensor.
6. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY
(a) Install the high mounted stop light.
7. INSTALL ROOF SIDE GARNISH INNER LH
Install roof side garnish inner LH. Installation
8. INSTALL ROOF SIDE GARNISH INNER RH
Install roof side garnish inner RH. Installation
9. INSTALL REAR SEAT SIDE GARNISH LH
Install rear seat side garnish LH. Installation
10. INSTALL REAR SEAT SIDE GARNISH RH
Install rear seat side garnish RH. Installation
11. INSTALL REAR DOOR SCUFF PLATE LH
Install rear door scuff plate LH. Installation
12. INSTALL REAR DOOR SCUFF PLATE RH
Install rear door scuff plate RH. Installation
13. INSTALL REAR SEATBACK ASSEMBLY
Install the rear seatback assembly. Installation
14. INSTALL REAR SEAT HEADREST ASSEMBLY CENTER
Install rear seat headrest assembly center. Installation
15. INSTALL REAR SEAT HEADREST ASSEMBLY LH
Install rear seat headrest assembly LH. Installation
16. INSTALL REAR SEAT HEADREST ASSEMBLY RH
Install rear seat headrest assembly RH. Installation
17. INSTALL REAR SEAT CUSHION ASSEMBLY
Install the rear seat cushion assembly. Installation
18. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
19. PERFORM INITIALIZATION
Perform initialization. Repair Instruction - Initialization
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.